Galaxy S4 LTE-A SHV-E300S was announced in March, 2013 with Exynos 5 Octa 5410, Quad-core 1.6 GHz Cortex-A15 & quad-core 1.2 GHz Cortex-A7 CPU, PowerVR SGX544MP3, 13 MP Camera, Li-Ion 2600 mAh battery, 2GB RAM and Android 4.2.2 Jelly Bean (upgradable to Android 4.3 Jelly Bean and Android 4.4.2 KitKat) out of the box. If you have Galaxy S4 LTE-A SHV-E300S and want to root it then we have a detailed step-by-step guide to gain root access over this device to enjoy a lot of benefits and taste awesome apps that you can’t use without rooting. Go ahead and follow the given guide.
Note: Please note that this guide can be used for Galaxy S4 LTE-A SHV-E300S running on Android 5.0.1 running with LRX22C.E300SKSUGOL5 built id only. Do not use this root package for any other device or incorrect variant.
Warning: UnlockRoot will not be held liable for any kind of damage occurred to your phone during or after the rooting process. Proceed at your own risk.
Data Backup: Take a full backup of all your important data and settings like contacts, pictures, videos, music before proceeding to the rooting instructions.
Make sure that the battery level of your Galaxy S4 LTE-A SHV-E300S should be at least about 60-70 charged to avoid unexpected shutdowns during the rooting process.
Steps To Root Galaxy S4 LTE-A SHV-E300S on Android 5.0.1:
Step No 1:- First download and install Samsung USB Drivers for your Galaxy S4 LTE-A SHV-E300S on your PC. If you have already Samsung USB Drivers installed on your PC then Skip this Step and go ahead.
Step No 2: Download CF-Auto Root file on your PC and unzip the root files on the desktop. Once the file are extracted, you’ll see these files:
Step No 3:- Turn OFF the Galaxy S4 LTE-A SHV-E300S to boot into Download Mode.
Step No 4:- Now turn ON the phone while pressing and holding Volume Down + Home + Power keys at same time for a few seconds to enter into Download Mode.
Step No 5:- While your phone is in the Download mode and shows a Warning Yellow Triangle Sign, then press the Volume Up key to continue.
Step No 6:- Run Odin3 that you have already downloaded (Step No 2) and you can find it in the extracted files on your computer.
Step No 7:- Connect your device with PC using its USB data cable.
Step No 8:- Once the Galaxy S4 LTE-A SHV-E300S is connected to the computer successfully, “Added” message will be displayed on Odin automatically after the device is recognized.
Step No 9:- Click on the AP button in Odin and select the CF-Auto-Root.tar file
Step No 10:- Next, click on the Start button in Odin to initiate the Flashing process.
Step No 11:- This flashing process might take 30-50 seconds to finish the rooting process on your Galaxy S4 LTE-A SHV-E300S. After the rooting process is successfully completed, a Green Box with Pass text will be appeared in Odin and your device will re-boot automatically.
Step No 12:- Now, disconnect your phone from the PC. Open Applications Menu on your Smartphone and find SuperSU App to check either your device is successfully rooted or not. If you can see the SuperSU app then you administrative rights over the internal file system of your device.
You can also install Root Checker app to verify that your device is successfully rooted or not.
Let us know in the comments area below if you have any issue or question about the above given guide.