Samsung Galaxy Note 4 was released in October 2014, running on Android OS version 4.4.4 KitKat out of the box. Being a Galaxy Note 4 owner, you’ll be glad to know that the Android 6.0.1 Marshmallow for these devices and below we have given a very handy guide to flash Android 6.0.1 official Marshmallow firmware on Samsung Galaxy Note 4 SM-N910C. Here it’s all for Galaxy Note 4 smartphone holders that there is a huge difference between the previous and the latest device Note 4 lies in the latest security patch level and other bug fixes. This firmware update recently rolling out by the Samsung and the users can now manually download to update Note 4. It is extremely recommended to install this latest official firmware for better utilisation of these best Android platforms. Just you’ll need to download the stock Android
It is extremely recommended to install this latest official firmware for better utilisation of these best Android platforms. Just you’ll need to download the stock Android official firmware for your Note 4 and flash it manually using the Odin tool.
The firmware files provided in this guide are meant for Galaxy Note 4. Do not install this firmware on any other device or incorrect variant. To check out what device you have, go to Settings > More/General > About Device or Settings > About Device.
AndroidSoul will not be liable for any damage occurred to your phone during or after the installation of Marshmallow official firmware update. Proceed at your risk.
- Create a proper backup of you valuable data such as SMS, MMS, Contacts, Call Logs, Media content and other files, etc. before proceeding to the installation guide. In case, anything goes wrong then you’ll be able to restore your data back.
- Download and Install Samsung Galaxy Note 4 USB Drivers on your computer.
- Enable USB Debugging Option on your Samsung Note 4 SM-N910C by navigating to Settings > Developer Options.
- Windows-based PC and the original data cable to establish a connection between your PC/laptop and Android device.
- Make sure that the battery of your phone is charged about 70 to 80% to avoid an unexpected shutdown while flashing process.
Steps to Install Android 6.0.1 Marshmallow on Galaxy Note 4 SM-N910C:
Step 1: Download the Official firmware file on the desktop of your computer for Samsung Note 4 SM-N910C.
Step 2: Unzip the download firmware file to get the .tar.md5 file.
Step 3: Boot your device into Recovery Mode and perform a factory data reset to attain a clean installation.
Step 4: Launch Odin3.exe.
Step 5: Connect your Galaxy Note 4 SM-N910C to the PC using its USB data cable and power it OFF to boot into Download Mode.
Step 6: Power ON the Galaxy Note 4 SM-N910C pressing and holding Volume Down + Home Button + Power keys at the same time. As a warning message appears, press Volume Up to continue.
Step 7: If the USB drivers are installed correctly, Odin will detect your phone and the ID: COM box will turn blue.
Step 8: In Odin app, click the AP button. Choose the firmware.tar.md5 or firmware.tar which you have already extracted.
Step 9: Click on the Start button in Odin and wait for the flashing process to complete successfully. After the firmware is successfully installed, the flashing process box will turn green.
Step 10: Disconnect your phone and reboot it manually after the flashing process has been completed successfully.
Step 11: The Galaxy Note 4 SM-N910C will take about 5 minutes to boot for the first time after installation. So please be patient.
Done! You have installed the official Android 6.0.1 Marshmallow firmware on Galaxy Note 4 SM-N910C successfully.
Tell us in the comments area below if you have questions or issues while updating your Galaxy Note 4 SM-N910C to the stock Android 6.0.1 Marshmallow.