Samsung has started rolling out the latest Android Marshmallow OS version for Galaxy J7 Prime smartphone. By following the given guide, you can now easily install DDU1AQB1 Android 6.0.1 Marshmallow firmware update on Galaxy J7 Prime G610F. Although Galaxy J7 Prime already received Android 6.0.1 Marshmallow that is based on the same version, so there won’t be some major changes in this way.
We at AndroidSoul will suggest you, to keep your Galaxy smartphone updated to avoid facing any issues like hanging or slow down. So here is an opportunity as you can install DDU1AQB1 Android 6.0.1 Marshmallow official firmware through OTA (over-the-air) or Samsung KIES. But if you are unable to update your smartphone through the OTA yet now; then still you can upgrade your Galaxy J7 Prime manually using the given detailed guide. All you need to download the stock Android 6.0.1 Marshmallow DDU1AQB1 official firmware for your J7 Prime, and flash it manually using the Odin tool.
DDU1AQB1 Android 6.0.1 Firmware Details:
|Build date||Fri, 03 Feb 2017 03:54:00 +0000|
|Security Patch Level||2017-02-01|
The firmware files provided in this guide are meant for Galaxy J7 Prime. Do not install this firmware on any other device or incorrect variant. To check out what device you have, go to Settings > More/General > About Device or Settings > About Device.
AndroidSoul will not be liable for any damage occurred to your phone during or after the installation of DDU1AQB1 Marshmallow official firmware update. Proceed at your risk.
- Create a proper backup of you valuable data such as SMS, MMS, Contacts, Call Logs, Media content and other files, etc. before proceeding to the installation guide. In case, anything goes wrong then you’ll be able to restore your data back.
- Download and Install Samsung Galaxy J7 Prime USB Drivers on your computer.
- Enable USB Debugging Option on your Samsung J7 Prime by navigating to Settings > Developer Options.
- Windows-based PC and the original data cable to establish a connection between your PC/laptop and Android device.
- Make sure that the battery of your phone is charged about 70 to 80% to avoid an unexpected shutdown while flashing process.
Steps to Install DDU1APHD Android 6.0.1 Marshmallow on Galaxy J7 Prime:
Step 1: Download the G610FDDU1AQB1 Official firmware file on the desktop of your computer for Samsung J7 Prime.
Step 2: Unzip the download firmware file to get the .tar.md5 file.
Step 3: Boot your device into Recovery Mode and perform a factory data reset to attain a clean installation.
Step 4: Launch Odin3.exe.
Step 5: Connect your Galaxy J7 Prime to the PC using its USB data cable and power it OFF to boot into Download Mode.
Step 6: Power ON the Galaxy J7 Prime pressing and holding Volume Down + Home Button + Power keys at the same time. As a warning message appears, press Volume Up to continue.
Step 7: If the USB drivers are installed correctly, Odin will detect your phone and the ID: COM box will turn blue.
Step 8: In Odin app, click the AP button. Choose the firmware.tar.md5 or firmware.tar which you have already extracted.
Step 9: Click on the Start button in Odin and wait for the flashing process to complete successfully. After the firmware is successfully installed, the flashing process box will turn green.
Step 10: Disconnect your phone and reboot it manually after the flashing process has been completed successfully.
Step 11: The Galaxy J7 Prime will take about 5 minutes to boot for the first time after installation. So please be patient.
Done! You have installed the official Android 6.0.1 Marshmallow firmware on Galaxy J7 Prime successfully.
Tell us in the comments area below if you have questions or issues while updating your Galaxy J7 Prime to the stock Android 6.0.1 Marshmallow.